Please review the technical requirements for our wine filtration methods
Cellar Dweller’s equipment is delivered to site in an enclosed trailer. A level cement pad and a space to maneuver/park a truck and 24 ft trailer combination is required to proceed with our wine filtration methods.
A fork lift is not typically required as the units are on wheels. However, a clear, level path from the trailer unloading area to the site where the equipment will be operated is required.
Utilities Required:
Cellar Dweller uses various plug types, amperages and voltages depending on our equipment and the winery electrical. Our equipment can use the following plug types and voltages:
- 208 single phase (100 Amp) – Plug type 4100R12
- 208 3 phase (60 Amp) – Plug type 560R9
- 208 3 phase (100 Amp) – Plug type 4100R9
- 460V 3 phase (30 Amp) – Plug type 430R7W(Reverse osmosis and Crossflow “B” only)
Our insurance requires that any electrical installations be performed by licensed electricians hired by the winery. We can provide a certified electrician on a consultative basis, but require prior notice. We can provide appropriate plugs to wineries to operate our equipment, either as a loaner or for sale.
Clean, cold water with good flow to accommodate our wine filtration methods is required. We carry propane heaters for wineries with lower hot water capacity.
